| |
|
|
|
| |
|
|
Advantages of
the PlateTronic system over Roller type testers.
PlateTronic is safer to use. There are no big electric
motors, no chains, no rollers to get caught on and no holes
on the workshop floor to trip into. A vital safety aspect
of OH&S.
PlateTronic measures brakes in ‘AS ON THE ROAD’
condition and therefore produces a more realistic test result.
|
| |
| |
| |
•
Capable of handling loads of up to 10 tonnes
per wheel so can be used to test fully loaded vehicles.
• More
economical to run and maintain. The entire system runs on
only 12v and maintenance is virtually non existent.
• The system
uses the latest load cell technology; nothing actually moves
so there is nothing to wear out.
|
|
|
|
|
|
•
Fast, safe and easy to use. Testing takes
only 5 seconds per axle and can be done by just one operator
driving the vehicle. Test speed is less than 5km/h.
•
PlateTronic will test an unlimited number of axles per vehicle
including prime movers, trailers and dog trailers.
|
| |
| |
|
|
• Can be used
for either Heavy or light vehicle Brake testing.
• Designed
to the specifications for skid plate brake testing as set
by the RTA (Road & Traffic Authority) in New South Wales.
• Far less expensive
than a Roller type system. |
| |
| |
|
|
•
PlateTronic is PC operated and very easy to
use, just follow the prompts. It produces an easy to understand
printout, showing Pass/Fail criteria in green or red accordingly.
• The graphic
illustration shows low brake forces, high % differences as
well as dragging brakes. |
| |
| |
|
|
• PlateTronic
utilises cutting edge digital technology but is designed and
built in Australia, for Australian conditions. This means
that the product is fully supported with spare parts, service
or maintenance if required. |
| |
