| |
|
|
|
| |
Q. |
Can I use Portalift Portable
Heavy Vehicle Hoists to lift smaller vehicles? |
|
| |
A. |
Yes. Portalift Small wheel adaptors give you
complete flexibility when it comes to lifting a smaller vehicle
even a car. See Small
Wheel Adaptors on the accessories page.
|
|
|
|
|
|
|
| |
Q. |
Do Portalift Portable Heavy Vehicle Hoists
meet Australian Standards?
|
|
| |
A. |
Yes. Portalift exceed the requirements of
AS/AZS 1418.9. They have independent Engineering approval and
are design registered in all states. Endurequip are also approved
suppliers to the Australian Defence Force.
|
|
|
|
|
|
| |
Q. |
Can Portalift Portable Heavy Vehicle Hoists
be used out of doors or in wash bays?
|
|
| |
A. |
Yes. Portalift hoists are fully powder coated.
All electrical components are rated at IP65 or better. |
|
| |
|
|
|
| |
Q. |
Do Portalift Hoists need much ongoing maintenance? |
|
| |
A. |
No. the hoists are renowned for their reliability
and longevity even under the most severe neglect and conditions.
Of course, Endurequip do not recommend this but Portalift Hoists
are designed and built with reliability in mind. Proper Maintenance
requirements are minimal and inexpensive. For full details contact
us or one of our authorised
repairers.
|
|
|
|
|
|
|
|
Q. |
How do I remove a wheel when the vehicle
is up on the hoists? |
|
|
A. |
Simply use your Endurequip Axle stands (supplied
standard with every set of portalift hoist). Place the Axle stands
under the vehicle and remove the hoists. The hoists can then be
used to support the wheel whilst the nuts are removed. The hoists
can then be used to lower to wheel to the floor if required. It
can obviously also be used to lift the wheel back into place when
refitting. |
|
| |
|
|
|
|
Q. |
What about safety when using Portalift
Hoists?
|
|
|
A. |
Portalift have more safety features than any
other hoist of their type. The safety features include; emergency
stop buttons on all posts, the remote control and the control
cabinet. Full current limit switches to back up the top limit
switch in case of tampering. An obstacle sensor which will shut
down the hoists if they are accidentally lowered onto any obstacle.
A full safety pawl system, full electrical protection, overload
protection. Etc. for full details give us a call.
|
|
|
|
|
|
|
Q. |
Can I save money on the day to day
running of my workshop using Portalift Hoist? |
|
| |
A. |
Yes. Most of our customers report time savings
of 30 to 50% depending on the type of vehicle and operation being
performed. This usually means a Pay Back period of around 2 years
for the average user. See our savings
calculator and read some of the customer
testimonials to see how you can start saving money today.
|
|
| |
|
|
|